Ryus' flashlight tutorial for light painting

Ryu’s lightworks flashlight for light painting 

Light painting paradise flashlight, adapter, and free hand light pen tip 175$ purchased 12/7/22 

Light Painting free hand tip gels 17.50$

https://youtu.be/_9xzPR28iQY

adjustable strobe frequency/speed, 

last mode memory and/or 

momentary switches

Light brightness:

8 - 1200 lumens max

Steps of brightness:  8-50-190-300-440-700-900-1200 lumens

While in constant light mode ==> Single press the side button to step through brightness

300 lm is 3 clicks

700 lm is 5 clicks

1200 lm is 7 clicks

There also is Adjustable strobe brightness from 50 lm to 1200 lm, 

Strobe speed ==> 4.5 - 50 Hz frequency

When in desired strobe mode ==> adjust speed of strobe by single press to cycle through 4.5-50 Hz frequency

Adjustable speed 4.5 - 50 Hz frequency 

To exit strobe mode ==> dbl press side button

momentary switch

On/off switch

Starburst mode

Strobe

Continuous light mode

Ribbon 

Memory 

no brightness step-down with use of battery.

23.5mm head

28650 battery

LPP adapter

LPP fiberoptic pen writer

Ryu’s lightworks flash light for light painting 

Light painting paradise flashlight, adapter, and free hand light pen tip 175$ purchased 12/7/22 

Light Painting free hand tip gels 17.50$

https://youtu.be/_9xzPR28iQY

Mode memory: 

Save mode & setting

Press side button 3- 5 sec ==> flashes 2x

When turn flash off & back on it will start from the saved mode

3 strobe modes - 

==> Enter strobe mode with dbl Press then cycle through speed of strobe with single press [&pause]  

Dbl press to advance to the next strobe mode 

   

1.  Strobe with 50% on & 50% off equal on/off (adjustable 4.5Hz-50Hz)

2.  Flash with "motion freezing" [5ms on time] (adjustable 9-66Hz)

3.  Ribbon  (adjustable 6Hz-66Hz) 

select brightness for the continuous light

default is 5ms flash at 60% brightness

==> Bright band and dark flashes intermittently

==> Dark band and bright flashes intermittently

XXXX

*Trigger [BURST] Mode [starburst mode] with one 5ms flashlight per side switch press. 

Set side button to emit a single  5 milisec burst of light :  which is star burst mode

Cycle through modes til power of light goes out.

[it’s difficult to determine the flash mode I’m in bc of the speed of the flash so Dbl clk til I reach the mode where the flash is off]

==> then save this mode ==> hold side Button 3-5 sec ==> flashes 2x

==> power off

==> then while holding side button power back on

now you're in burst mode 

To exit burst mode ==> turn flashlight off then on ==> click side button 2x

just dble press side button to exit out and return to constant light mode.

*To set the side switch as an ON/OFF switch  

==> Hold side button while powering on flashlight ==> it will flash 2x 

*To Set side button to be momentary button

==> Hold side button while powering on flashlight

 ==> hold side button longer until ==> it will flashes 2x then flashes 3x

Light brightness:

8 - 1200 lumens max

Steps of brightness:  8-50-190-300-440-700-900-1200 lumens

While in constant light mode ==> Single press the side button to step through brightness

300 lm is 3 clicks

700 lm is 5 clicks

1200 lm is 7 clicks

There also is Adjustable strobe brightness from 50 lm to 1200 lm, 

Strobe speed ==> 4.5 - 50 Hz frequency

When in desired strobe mode ==> adjust speed of strobe by single press to cycle through them.

Adjustable speed 4.5 - 50 Hz frequency 

To exit strobe mode ==> dbl press side button when flash is on.